Testing cod end and square mesh panel configurations in the English SW otter trawl fishery 2020/21 - Fisheries Science Partnership
Report_67_ SW_demersal_trawl_selectivity _2020_21
This work was carried out as part of the Fisheries Science Partnership (FSP) programme. The primary objective of the project was to obtain data on the differences between the currently permitted and proposed new trawl configurations, principally to move from the widespread use of 80mm mesh cod end to a default of 100mm. This information will help to provide evidence on the performance of more selective trawl configurations to inform on proposed changes to technical measures regulations in the southwest otter trawl mixed fishery. For this purpose, two trials lasting 6 days each took place in ICES Division 7e on the twin-rig otter trawler Rockfisher (SU6) in the months of October to December 2020. The vessel conducted simultaneous comparative tows of the control gear and two experimental gears. The first trial compared two trawls, both with 100mm cod ends, and one with an 80mm square mesh panel (SMP) and the other with 100mm SMP. A total of 19 paired hauls were collected for this trial. The second trial compared 100mm cod end with an 80mm SMP to an 80mm cod end with an 80mm SMP (as normally used by the vessel). A total of 14 paired hauls were completed for the second trial. At each station sampled, shot and haul, positional, times, depths and towing speed information were recorded, and for all species of fish length distribution data were taken, including collecting data on the benthic component of the catch.
dataset
https://data.cefas.co.uk/view/21389
name: Cefas Data Portal
description: The Cefas Data Portal contains metadata records and data sets available to download and connect to in support of our commitment to open science. Data is available in the following formats: Binary download.
function: download
CEFAS21389
https://data.cefas.co.uk
eng
biota
revision
2011-03-25
revision
2011-03-25
publication
2008-06-01
publication
2008-06-01
revision
2010-05-18
publication
2012-01-11
publication
2012-01-11
-4.00
-0.50
51.00
50.00
2020-10
2020-12
publication
2022-01-19
revision
2023-08-01
creation
2021-11-30
notPlanned
A fixed routine for handling and sorting the catch was maintained throughout the trials. Catches from the two cod ends were always kept separate and were processed as either the retained or discarded fraction. Cefas observers sampled using standard techniques. For each haul, all fish species caught were measured to the nearest cm below. Sub sampling was necessary on occasions when the fish catch was large, and raising factors were calculated accordingly. Additionally, benthos was separated from the discarded fish, identified down to group level, and counted. The results were compiled in Excel and plotted graphically in R.
publication
2013-12-10
false
See the referenced specification
publication
2010-12-08
true
See the referenced specification
Unknown
Centre for Environment, Fisheries and Aquaculture Science, Lowestoft Laboratory (CEFAS)
Cefas Lowestoft Laboratory
Pakefield Road
Lowestoft
NR33 0HT
UK
originator
Centre for Environment, Fisheries and Aquaculture Science, Lowestoft Laboratory (CEFAS)
Cefas Lowestoft Laboratory
Pakefield Road
Lowestoft
NR33 0HT
UK
custodian
Centre for Environment, Fisheries and Aquaculture Science, Lowestoft Laboratory (CEFAS)
Cefas Lowestoft Laboratory
Pakefield Road
Lowestoft
NR33 0HT
UK
distributor
Centre for Environment, Fisheries and Aquaculture Science, Lowestoft Laboratory (CEFAS)
owner
Department for Environment, Food and Rural Affairs (DEFRA)
owner
Centre for Environment, Fisheries and Aquaculture Science, Lowestoft Laboratory (CEFAS)
Cefas Lowestoft Laboratory
Pakefield Road
Lowestoft
NR33 0HT
UK
pointOfContact
2023-08-01T01:55:10