c2beb255-9a74-25a0-e054-002128a47908
English
dataset
British Geological Survey
+44 115 936 3100
Environmental Science Centre, Keyworth
NOTTINGHAM
NOTTINGHAMSHIRE
NG12 5GG
United Kingdom
enquiries@bgs.ac.uk
pointOfContact
2022-06-28
UK GEMINI
2.3
http://data.bgs.ac.uk/id/dataHolding/13607754
BGS Permeability version 8
2021-01-07
creation
http://data.bgs.ac.uk/id/dataHolding/13607754
The BGS Permeability data product shows estimated rates of water movement from the ground surface to the water table. BGS Permeability version 8 incorporates the latest geology mapping (BGS Geology 50k). This includes updates to the lithology-coding schema, the LEX_RCS. A 2-part code used to identify the named rock unit from the BGS lexicon of named rock units (LEX) followed by a Rock Classification Scheme (RCS) code which describes the rocks lithological characteristics e.g. texture and composition. Updates to these codes and latest dissolution hazard data sourced from BGS GeoSure: Soluble Rocks have been reviewed and classified as part of the version 8 release. The product covers Great Britain and is presented at a scale of 1:50 000, based on the geological data at the same scale. However, in areas where the geology is not mapped to this scale, the next best available scale is used. The BGS Permeability data product can be used to compare the relative permeability of deposits at the regional scale, indicating where highly permeable rocks could allow rapid infiltration to occur, or where less permeable rocks are present and water could pond on the ground surface. The dataset can be used as a component in a wide range of geo-environmental assessments such as natural flood management, Sustainable Drainage Systems, engineering desk studies, slope stability, and aquifer vulnerability. It is for use at the regional scale and is not recommended for use at the site-specific scale.
Enquiries
British Geological Survey
0115 936 3143
0115 936 3276
Environmental Science Centre, Nicker Hill, Keyworth
NOTTINGHAM
NOTTINGHAMSHIRE
NG12 5GG
United Kingdom
enquiries@bgs.ac.uk
distributor
Enquiries
British Geological Survey
0115 936 3143
0115 936 3276
Environmental Science Centre, Nicker Hill, Keyworth
NOTTINGHAM
NOTTINGHAMSHIRE
NG12 5GG
United Kingdom
enquiries@bgs.ac.uk
pointOfContact
Enquiries
British Geological Survey
01491 838800
01491 692345
Maclean Building, Crowmarsh Gifford
WALLINGFORD
OXON
OX10 8BB
United Kingdom
enquiries@bgs.ac.uk
distributor
Enquiries
British Geological Survey
01491 838800
01491 692345
Maclean Building, Crowmarsh Gifford
WALLINGFORD
OXON
OX10 8BB
United Kingdom
enquiries@bgs.ac.uk
pointOfContact
asNeeded
https://resources.bgs.ac.uk/images/geonetworkThumbs/c2beb255-9a74-25a0-e054-002128a47908.png
Geology
GEMET - INSPIRE themes
2008-06-01
publication
Ground water movement
Permeability
BGS Thesaurus of Geosciences
2011
revision
NERC_DDC
otherRestrictions
license
Either : (i) the dataset has not been formally approved by BGS for access and use by external clients under license; and / or (ii) the dataset contains 3rd party data or information obtained by BGS under terms and conditions that must be consulted before the dataset can be provided to, or accessed by, BGS staff or external clients. Refer to the BGS staff member responsible for the creation of the dataset if further advice is required. He / she should be familiar with the composition of the dataset, particularly with regard to 3rd party IPR contained in it, and any resultant access restrictions. This staff member should revert to the IPR Section (IPR@bgs.ac.uk) for advice, should the position not be clear.
otherRestrictions
The copyright of materials derived from the British Geological Survey's work is vested in the Natural Environment Research Council [NERC]. No part of this work may be reproduced or transmitted in any form or by any means, or stored in a retrieval system of any nature, without the prior permission of the copyright holder, via the BGS Intellectual Property Rights Manager. Use by customers of information provided by the BGS, is at the customer's own risk. In view of the disparate sources of information at BGS's disposal, including such material donated to BGS, that BGS accepts in good faith as being accurate, the Natural Environment Research Council (NERC) gives no warranty, expressed or implied, as to the quality or accuracy of the information supplied, or to the information's suitability for any use. NERC/BGS accepts no liability whatever in respect of loss, damage, injury or other occurence however caused.
The dataset is made available to external clients under BGS Digital Data Licence terms and conditions. Revert to the IPR Section (iprdigital@bgs.ac.uk) if further advice is required with regard to permitted usage.
vector
English
geoscientificInformation
ISO 3166_2
2009
revision
GBN
British Geological Survey Gazetteer: Geographical hierarchy from Geosaurus
1979
creation
GREAT BRITAIN [id=139600]
-8.3400
2.6900
49.8400
60.8600
1879
2021
ESRI Shapefile (SHP)
Enquiries
British Geological Survey
0115 936 3143
0115 936 3276
Environmental Science Centre, Nicker Hill, Keyworth
NOTTINGHAM
NOTTINGHAMSHIRE
NG12 5GG
United Kingdom
enquiries@bgs.ac.uk
distributor
Enquiries
British Geological Survey
01491 838800
01491 692345
Maclean Building, Crowmarsh Gifford
WALLINGFORD
OXON
OX10 8BB
United Kingdom
enquiries@bgs.ac.uk
distributor
https://www.bgs.ac.uk/datasets/permeability/
BGS Datasets - Permeability Homepage
information
https://doi.org/10.5285/e2a05b99-ac06-415d-836b-e3bf37fe7191
Digital Object Identifier (DOI)
information
dataset
dataset
INSPIRE Implementing rules laying down technical arrangements for the interoperability and harmonisation of Geology
2011
publication
See the referenced specification
false
Commission Regulation (EU) No 1089/2010 of 23 November 2010 implementing Directive 2007/2/EC of the European Parliament and of the Council as regards interoperability of spatial data sets and services
2010-12-08
publication
See http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2010:323:0011:0102:EN:PDF
false
The BGS Permeability V8 product is derived from the 4 geological themes of BGS Geology 50k: mass-movement, artificial, superficial deposits and bedrock. Each polygon in the BGS Geology 50k is attributed with a 2-part code; LEX-RCS code (rock unit-lithology combination). The LEX-RCS code is assigned (attributed) with 3 further codes to indicate the Predominant Flow Mechanism, and the Maximum and Minimum Permeability. The BGS Permeability V8 product was produced by dissolving the individual themes of BGS Geology 50k based on LEX-RCS and joining to a Microsoft Access lookup table of all the LEX-RCS combinations with their assigned permeability codes. The first code 'Predominant Flow Mechanism' indicates how fluid will migrate from the ground surface through the unsaturated zone of each rock unit and lithology combination and has three classes: Intergranular, Fracture or Mixed (intergranular and fracture). The second and third codes (Maximum and Minimum Permeability) indicate the range of flow rates likely to be encountered in the unsaturated zone for each rock unit and lithology combination to which five classes have been assigned for the Maximum and Minimum Permeability codes: very high, high, moderate, low, and very low. The Maximum and Minimum Permeability values represent a likely permeability range for the specified rock unit and lithology combination at, and immediately below, its outcrop or subcrop (rather than at any significant depth). The Maximum Permeability represents the fastest potential vertical rate of migration through the unsaturated zone likely to be encountered in the specified rock unit-lithology combination. The Minimum Permeability represents the minimum, and in some cases more normal, bulk rate of vertical movement likely to be encountered. Where a widely variable combination of lithologies occurs within a rock unit this Minimum Permeability value reflects the probable movement rate likely to be encountered in the least permeable horizons. These 3 codes were ascribed solely on the known hydrogeological characteristics of the various lithologies, considering their age, dissolution potential, degree of cementation/induration and fracturing. In unconsolidated deposits, intergranular flow is the predominant flow mechanism. In most consolidated sedimentary rocks, and igneous and metamorphic rocks, fracture flow will occur and hence a wide range of permeability values can occur for any one lithology. The potential for dissolution and degree of cementation, lithological variation and induration are also factors that affect measured values.