1d489509-db13-0da4-e054-002128a47908
English
nonGeographicDataset
non geographic dataset
British Geological Survey
+44 131 667 1000
The Lyell Centre, Research Avenue South
EDINBURGH
LOTHIAN
EH14 4AP
United Kingdom
enquiries@bgs.ac.uk
pointOfContact
2021-01-26
UK GEMINI
2.3
http://data.bgs.ac.uk/id/dataHolding/13606791
EPSRC Project: Process Intensification for Post-combustion Carbon Capture using Rotating Packed Bed through Systems Engineering Techniques
2014
creation
http://data.bgs.ac.uk/id/dataHolding/13606791
The emission of carbon dioxide into the atmosphere has caused huge concerns around the world, in particular because it is widely believed that the increase in its concentration in the atmosphere is a key driver of climate change. If the current trend in the release of carbon dioxide continues, global temperatures are predicted to increase by more than 4 degrees centigrade, which would be disastrous for the world. With the increase in world population, the energy demand is also increasing. Coal-fired and gas-fired power plants still play a central role in meeting this energy demand for the foreseeable future, even though the share of renewable energy is increasing. These power plants are the largest stationary sources of carbon dioxide. Carbon capture is a technique to capture the carbon dioxide that is emitted in the flue gas from these power plants. This proposal seeks to make a significant improvement in the methods used for carbon capture in order to reduce the total costs. Post-combustion CO2 capture by chemical absorption using solvents (for example, monoethanolamine - MEA) is one of the most mature technologies. The conventional technology uses large packed columns. The cost to build and run the capture plants for power plants is currently very high because: (1) the packed columns are very large in size; (2) the amount of steam consumed to regenerate solvents for recirculation is significant. If we can manage to reduce the size of packed columns and the steam consumption, then the cost of carbon capture will be reduced correspondingly. From our previous studies, we found that mass transfer in the conventional packed columns used for carbon capture is very poor. This proposed research is expected to make very significant improvements in mass transfer. The key idea is to rotate the packed column so that it spins at hundreds of times per minute - a so-called rotating packed bed (RPB). A better mass transfer will be generated inside the RPB due to higher contact area. With an intensified capture process, a higher concentration of solvent can be used (for example 70 wt% MEA) and the quantity of recirculating solvent between intensified absorber and stripper will be reduced to around 40%. Our initial analysis has been published in an international leading journal and it indicates that the packing volume in an RPB will be less than 10% of an equivalent conventional packed column. This proposal will investigate how to design and operate the RPB in order to separate carbon dioxide most efficiently from flue gas. The work will include design of new experimental rigs, experimental study, process modelling and simulation, system integration, scale-up of intensified absorber and stripper, process optimisation, comparison between intensified capture process and conventional capture process from technical, economical and environmental points of view. The research will include an investigation into the optimum flow directions for the solvent and flue gas stream (parallel flow or counter-current) for intensified absorber and the optimum design of packing inside the RPB. The proposal will also compare the whole system performance using process intensification vs using conventional packed column for a CCGT power plant. Based on this, an economic analysis will be carried out to quantify the savings provided by this new process intensification technology. Grant number: EP/M001458/1.
Meihong Wang
University of Hull
United Kingdom
not available
pointOfContact
Meihong Wang
University of Hull
United Kingdom
not available
principalInvestigator
notApplicable
https://resources.bgs.ac.uk/images/geonetworkThumbs/1d489509-db13-0da4-e054-002128a47908.png
Geology
GEMET - INSPIRE themes
2008-06-01
publication
Carbon capture and storage
BGS Thesaurus of Geosciences
2011
revision
NERC_DDC
otherRestrictions
intellectualPropertyRights
Either : (i) the dataset has not been formally approved by BGS for access and use by external clients under license; and / or (ii) the dataset contains 3rd party data or information obtained by BGS under terms and conditions that must be consulted before the dataset can be provided to, or accessed by, BGS staff or external clients. Refer to the BGS staff member responsible for the creation of the dataset if further advice is required. He / she should be familiar with the composition of the dataset, particularly with regard to 3rd party IPR contained in it, and any resultant access restrictions. This staff member should revert to the IPR Section (IPR@bgs.ac.uk) for advice, should the position not be clear.
otherRestrictions
The copyright of materials derived from the British Geological Survey's work is vested in the Natural Environment Research Council [NERC]. No part of this work may be reproduced or transmitted in any form or by any means, or stored in a retrieval system of any nature, without the prior permission of the copyright holder, via the BGS Intellectual Property Rights Manager. Use by customers of information provided by the BGS, is at the customer's own risk. In view of the disparate sources of information at BGS's disposal, including such material donated to BGS, that BGS accepts in good faith as being accurate, the Natural Environment Research Council (NERC) gives no warranty, expressed or implied, as to the quality or accuracy of the information supplied, or to the information's suitability for any use. NERC/BGS accepts no liability whatever in respect of loss, damage, injury or other occurence however caused.
Either: (i) the dataset is made freely available, e.g. via the Internet, for a restricted category of use (e.g. educational use only); or (ii) the dataset has not been formally approved by BGS for access and use by external clients under licence, but its use may be permitted under alternative formal arrangements; or (iii) the dataset contains 3rd party data or information obtained by BGS under terms and conditions that must be consulted in order to determine the permitted usage of the dataset. Refer to the BGS staff member responsible for the creation of the dataset if further advice is required. He / she should be familiar with the composition of the dataset, particularly with regard to 3rd party IPR contained in it, and any resultant use restrictions. This staff member should revert to the IPR Section (ipr@bgs.ac.uk) for advice, should the position not be clear.
English
geoscientificInformation
2014
2018
EPSRC Grant number: EP/M001458/1
http://www.bgs.ac.uk/
HTTP
BGS Homepage
The BGS Homepage is an entry point to the BGS data services.
information
nonGeographicDataset
non geographic dataset
INSPIRE Implementing rules laying down technical arrangements for the interoperability and harmonisation of Geology
2011
publication
See the referenced specification
false
Commission Regulation (EU) No 1089/2010 of 23 November 2010 implementing Directive 2007/2/EC of the European Parliament and of the Council as regards interoperability of spatial data sets and services
2010-12-08
publication
See http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2010:323:0011:0102:EN:PDF
false
EPSRC project, grant number: EP/M001458/1, Lead institution: University of Hull