UKGEOS Cheshire TH0424 Additional Core Scanning Dataset
An additional core scanning dataset from the TH0424 drill core that was drilled onshore at Thornton Science Park, Cheshire, UK as part of the UK Geoenergy Observatories (UKGEOS) Cheshire ground investigation funded by UKRI/NERC. The approximately 100 m long core succession comprises the Sherwood Sandstone Group. This additional core scanning dataset pack contains high-resolution optical images and X-ray fluorescence (XRF) downcore point measurements obtained using a Geotek Core Workstation (MSCL-XYZ) at the Core Scanning Facility (CSF) at the British Geological Survey (BGS).
dataset
https://doi.org/10.5285/381e9664-0f43-4e4c-90ae-1b16ba83681b
name: Digital Object Identifier (DOI)
function: information
https://webapps.bgs.ac.uk/services/ngdc/accessions/index.html#item178248
name: Data
function: download
http://data.bgs.ac.uk/id/dataHolding/13608058
eng
geoscientificInformation
publication
2008-06-01
X ray fluorescence spectroscopy
Imagery
Abrasion
Drill core
UK Location (INSPIRE)
revision
2022
NERC_DDC
-2.8200
-2.8200
53.2700
53.2700
revision
2009
Cheshire County [id=12343]
2022-02-08
2022-03-11
creation
2022-08-05
notEntered
The core was stored inside sealed PVC core liner prior optical imaging and XRF point measurements. The core was slabbed 1/3 to 2/3 down its length using a specially designed core clamp to allow for asymmetric core slabbing (Monaghan et al., 2021). High-resolution optical images of the slabbed and wet core sections within the core clamps were collected shortly after slabbing the core using a Geoscan V colour line-scan camera set to 10 ms exposure and a visible resolution of 50 µm. To visually enhance core features and structures the images were scaled using GQuickView (Geotek Ltd) and compressed into jpgs. The processed outputs are available in two folders LS_Processed_Images the scaled images and LS_Processed_Images_Ruler the scaled images with a ruler showing drilling depths. The jpg images are named using the core box number. The top of the image is the top of the core box, the base of the image is the base of the core box. Each corebox ID relates to a depth range listed within TH0424_Corebox_Depths.csv. In addition, a colour chart image was taken under the same illumination condition every 5th core section, which can be used for colour calibration and colour reference. The colour chart images are named using drillers depth of the 5 core sections imaged. XRF point measurements on the slabbed and wet core sections within the core clamps shortly after slabbing the core were collected at 5 cm intervals and 10 s exposure using a Geotek XYZ Core Workstation. The XRF data was acquired with no filter at 10kV for low Z range elements and with a 25-micron silver filter at 40kV for high Z range elements. XRF elemental data is presented as raw counts (peak area). The raw count data provides an indication of variation in elemental abundances along the core, but is not a quantitative analysis. Ka-Area is the peak area for the K-alpha emission line for that particular element. Ka AreaSd is the relative error, which is a function of uncertainty in the Ka emission line intensity and uncertainty in the background intensity at the line position. This uncertainty/error is expressed as 2 standard deviation (sd). The peak areas were fitted using bAxil, a software for XRF spectrum analysis and one fitting template. In this software, the overall chi-square value (Chi-squared) indicates the goodness-of-fit of the mathematical model compared to the experimental data, with lower values indicating a better fit. Ka-Areas of <500 counts should be considered with caution as signals for very low counts are primarily dominated by noise. The dataset was then processed to remove data points over cracks, missing core intervals and heavily fractured sections of core where no reliable data could be collected. The final dataset has been aggregated into XYZ_Processed_Data.csv and is presented in drillers depth. The XRF spectral data can be requested from ukgeosenquiries@bgs.ac.uk. In addition, replicate scans as well as reference sample points have been performed to ensure consistent acquisition conditions and to identify any instrumental drift. Replicate scans can be used to identify poor core condition, and corresponding poor XRF data quality. This data is compiled in XYZ_Replicates.csv and indicated within XYZ_Processed_Data.csv ("Replicate Scan?" column). The impact of water on X-ray fluorescence (XRF) point measurements was investigated using the last 7 m of core recovered from UKGEOS TH0424 borehole (94 to 101 m bgl). This core was slabbed, scanned wet in the clamps and then allowed to dry fully in the clamps for 54 days prior to re-scanning. The dataset: XRF_wet_vs_dry.csv provides a comparison of the wet (i.e. freshly slabbed) vs dry core XRF analysis.
publication
2011
false
See the referenced specification
publication
2010-12-08
false
See http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2010:323:0011:0102:EN:PDF
JPG
The copyright of materials derived from the British Geological Survey's work is vested in the Natural Environment Research Council [NERC]. No part of this work may be reproduced or transmitted in any form or by any means, or stored in a retrieval system of any nature, without the prior permission of the copyright holder, via the BGS Intellectual Property Rights Manager. Use by customers of information provided by the BGS, is at the customer's own risk. In view of the disparate sources of information at BGS's disposal, including such material donated to BGS, that BGS accepts in good faith as being accurate, the Natural Environment Research Council (NERC) gives no warranty, expressed or implied, as to the quality or accuracy of the information supplied, or to the information's suitability for any use. NERC/BGS accepts no liability whatever in respect of loss, damage, injury or other occurence however caused.
British Geological Survey
Environmental Science Centre, Nicker Hill, Keyworth
NOTTINGHAM
NG12 5GG
United Kingdom
0115 936 3143
0115 936 3276
distributor
British Geological Survey
Environmental Science Centre, Nicker Hill, Keyworth
NOTTINGHAM
NG12 5GG
United Kingdom
0115 936 3143
0115 936 3276
originator
British Geological Survey
Environmental Science Centre, Nicker Hill, Keyworth
NOTTINGHAM
NG12 5GG
United Kingdom
0115 936 3143
0115 936 3276
pointOfContact
British Geological Survey
Environmental Science Centre,Keyworth
NOTTINGHAM
NG12 5GG
United Kingdom
+44 115 936 3100
pointOfContact
2025-03-03